 |
| Qty |
Item |
| No Items in Basket |
|
|
 |
|
|
|
 |
|
 |
|
| |
|
| |
|
| We are Members of The Tile Association |
|
|
 |
|
|
|
 |
|
 |
| |
|
 Flexible, seamless and waterproof, the BAL WP1 Waterproof Shower Kit is designed for use on internal walls and floors prior to the fixing of eramic tiles. It provides a totally waterproof barrier that is also suitable for use in areas where movement may occur e.g. around drainage hannels, junctions between walls/floors etc. and can support a aximum weight of 32 kg/m2.
BAL WP1 Waterproof Shower Kit is recommended for showers, athrooms, kitchens, laundry and utility rooms, around suitable drainage channels, upstands, pipes and floor wastes. |
| |
|
|
Everything you need for the project:
BAL WP1 Waterproof Coating,
BAL WP1 Polyester Tape,
BAL WP1 Polyester Matting,
BAL Prime APD. |
|
|
Proven in industrial, commercial
and domestic installations. |
|
|
Simple, easy to follow instructions. |
| |
|
|
Flexible
accommodates some movement and vibration. |
|
|
Waterproofs completely and safely.
Most backgrounds including Gypsum plaster, plasterboard, fibreboard, anhydrite screeds,
timber based backgrounds, sand:cement render
and dense or smooth-faced blocks. |
|
| |
| BAL WP1 WATERPROOF SHOWER KIT |
| Contains sufficient contents to cover approx. 4.5m2 |
| BAL WP1 Waterproof Coating |
4.5kg Bucket |
| BAL WP1 Polyester Tape |
10m x 100mm |
| BAL WP1 Polyester Matting |
1m2 approx |
| BAL Prime APD |
500ml |
| |
| ALSO AVAILABLE |
| BAL WP1 Waterproof Coating |
8kg Bucket |
| BAL WP1 Polyester Tape |
5m x 100mm lengths & 50m x 100mm rolls |
| BAL WP1 Polyester Matting |
1m2 pieces & 50m x 1m rolls |
| BAL Prime APD |
2.5 Litre |
|
 |
| |
 |
| |
| THE COMPLETE
WATERPROOFING SYSTEM |
| |
 |
THE BAL 10 YEAR GUARANTEE
BAL products* are supplied with the benefit of a
10 year product guarantee. For further details or copies
please contact the Company’s marketing department.
*Except BAL Tile Aftercare products. |
|
|
| |
Building Adhesives Limited,
Longton Road, Trentham, Stoke-on-Trent, ST4 8JB, England.
Sales Tel: +44 (0) 1782 591160 Fax: +44 (0) 1782 591131
Technical Tel: +44 (0) 1782 591120 Fax: +44 (0) 1782 591121
www.building-adhesives.com
Unit 6, Plato Business Park, Damastown Industrial Estate,
Damastown, Dublin 15, Ireland.
Tel: +353 (0) 1 822 2776 Fax: +353 (0) 1 822 2777 |
| |
Note:
The customer must verify the suitability of any information, opinion, recommendation or advice (“Information”) provided by the
Company for the particular application for which any goods are intended to be used and the Company accepts no liability (whether in
contract, tort or otherwise) Whatsoever for any loss, damage or expense arising from the misuse of any Information it supplies nor for
the use of any Information in or for applications which are unsuitable or inappropriate. Building Adhesives Limited operates a continuous
research and development programme and reserves the right to alter or to update Information from time to time.
© Copyright Building Adhesives Limited 2005 |
|
| |
|
| |
 |
FOR A PROFESSIONAL, WATERTIGHT SHOWER |
|
| |
 |
 |
AVOID DISASTERS
Expensive, beautifully fixed tiles are wasted if the shower area is not effectively “tanked” to make it totally waterproof. BAL WP1 Waterproof Shower Kit provides the solution. |
| |
 |
| |
| 1. |
Concrete Base |
| 2. |
Plasterboard |
| 3. |
BAL Prime APD |
| 4. |
BAL WP1 Waterproof Coating |
| 5. |
BAL WP1 Polyester Tape |
| 6. |
BAL WP1 Polyester Matting |
| 7. |
BAL White Star CERAMIC WALL TILE ADHESIVE |
| 8. |
BAL Single Part Flexible |
| 9. |
CERAMIC FLOOR TILE ADHESIVE |
| 10. |
BAL Microflex Wall Grout |
| 11. |
BAL Microflex Wide Joint Grout |
| 12. |
BAL Microseal SILICONE SEALANT |
|
|
 |
 |
 |
 |
 |
 |
 |
 |
|
| |
PREPARATION
Before the use of the BAL WP1
Waterproof Shower Kit, new structures
should be allowed to dry out for the
following minimum periods: concrete
6 weeks; plaster 4 weeks; cement/sand
rendering 2 weeks and screed 3 weeks
(24 hours for screeds and renders
containing BAL Quickset Cement).
For Anhydrite screeds seek manufacturers
recommendation. Partition walls and
timber floors must be adequately
ventilated from behind or below, be well
braced and sufficiently strong and rigid
enough to support the weight of tiling.
Surfaces must be dry, sound, and free
from oil, grease, dust and other
contamination. Any voids or gaps must
be filled with a suitable filler or sealant
and allowed to cure. Cracks less than
1.5mm may be bridged with BAL WP1
Polyester Matting or BAL WP1 Polyester
Tape. Do not use in cold, i.e. less than
5ºC, or in damp conditions.
|
| |
| INSTALLATION PROCEDURES |
| 1. |
Prime all surfaces with BAL Prime APD and allow to dry. |
| 2. |
At the following locations apply BAL WP1 Waterproof Coating with a suitable brush or float.
- Internal and external corners of walls/partitions and their junctions with bases, upstands, columns etc.
- Pipe penetration, drainage channels and outlets.
- Junctions of different base/backgrounds materials.
- Cracks and joints in background/base. |
| 3. |
Reinforce the above areas with BAL WP1 Polyester Tape. |
| 4. |
Apply a second coat of BAL WP1 Waterproof Coating over the BAL WP1 Polyester Tape.
5. Apply BAL WP1 Waterproof Coating to walls using either a brush or a steel float at a maximum of 2mm thickness. |
| 5. |
Apply BAL WP1 Waterproof
Coating to walls using either a
brush or a steel float at a maximum
of 2mm thickness. |
| 6. |
Apply BAL WP1 Waterproof Coating to the floor. |
| 7. |
For heavy duty wet areas (e.g. communal showers and industrial wet process areas)
and where some vibration or deflection in the base may be expected (e.g. timber bases),
reinforce with BAL WP1 Polyester Matting (may be cut to the correct size with scissors). |
| 8 |
Bed the matting into the coating and apply a second layer of BAL WP1 Waterproof Coating over the top. |
| 9. |
BAL WP1 Waterproof Coating forms a background suitable for either BAL ready mixed or cementitious adhesives (no priming necessary). Allow the membrane to dry for
at least 24 hours before tiling. |
|
|
|
| |
| |
|
|
|
|
|
 |
|
 |
|
|
|
|
